|
|
|
What compound is best for you?
The first four listed compounds in this section, ME20, ME22, N35S, N45S are our most popular and versitile. They are used a lot in circuit racing, Rallying, Targa etc. The remaining compounds listed are more for fine tuning and specific applications, ...read more
|
| |
|
|
ME20
ME20 is a semi metallic compound, developed for racing and rallying.
It is a step up in initial bite and is more straight forward with regards to brake power. Originally developed for BTCC Super Touring Cars where you have high traction ...read more
|
| |
|
|
ME22
ME22 is a semi metallic compound, developed for racing and rallying. It has a very good firm pedal feel with a good response and initial bite. It is best suited for drivers that prefer to use a high pedal pressure and still have a controlled braking ...read more
|
| |
|
|
N35S
N35S has a very good initial bite and represents a straighter line between initial bite and brake power. It is easy to control and a special characteristic is that the driver can initiate light braking with a slight touch of the pedal and then direct ...read more
|
| |
|
|
N45S
The N45S is a compound with a very high initial bite. It is a good step up from N35S and has an exceptional response. The brake power itself is also elevated so the difference between initial bite and maximum brake power is lower than N35S.
...read more
|
| |
|
|
NO3W
The NO3W is a substantial step up in initial bite from ME20. The pedal is easy to modulate for a good feeling between fast response and hard brake power especially at high speed braking. The reaction of the compound is excellent, which enables the dr ...read more
|
| |
|
|
N30S
The N30S compound was developed from N35S but with lower friction. On a light weight car and a low friction road surface N35S has too higher bite level. Endless then developed N30S which has a slightly lower friction level but good modulation. You ca ...read more
|
| |
|
|
N40S
As the name implies N40S falls between N35S and N45S. Also part of the "new generation" compounds the N40S shares all of its basic properties with the other compounds of this range, but gives a mid point with concern to friction values and bite.
...read more
|
| |
|
|
PC35
PC35 was developed based on N35S, It has better heat resistance and a shorter stiffer pedal feel than N35S.
The stiffer pedal gives you a better bite feeling, because of the shorter pedal travel.
If you like a softer pedal N35S ...read more
|
| |
|
|
NC44
This is a semi metallic compound, developed for use in rear brake systems of front wheel drive cars where most of the braking effort is carried out on the front brakes, thus lessening the chance of locking rear wheels with a to aggressive compound fi ...read more
|
| |
|